Home  ›  How to Upload Pictures From a Canon Powershote Elph 360

How to Upload Pictures From a Canon Powershote Elph 360

Written By quarta-feira, 13 de abril de 2022 Add Comment Edit
Article ID: ART164100 | Date published: 01/04/2016 | Date final updated: 02/04/2022

Description

Acquire how to send images to your figurer with your PowerShot camera'south Wi-Fi function.

Solution

The the unlike options beneath will guide you lot on the best way to utilise the Wi-Fi® function of your PowerShot camera so that y'all can transfer the images wirelessly from your camera to your computer.

Earlier you begin

  1. Cheque the calculator`s requirements.

  • Computer environment required to connect the camera via Wi-Fi to use CameraWindow DC.

  • Windows seven Starter and Home Basic editions are non supported.

  • Windows 7 North (European version) and KN (South Korean version) require a separate download and installation of Windows Media Feature Pack.

  • When unsure of your computer setup, refer to the user manual provided with the estimator.

  1. Make sure that the included CameraWindow software is installed. The software is likewise available for download from the Canon website .

  2. Ostend that an access point base unit or Wi-Fi router is connected to the calculator.

  • An admission point base or router is a device that creates a network (LAN) structure that connects multiple computers.

  • A router that contains an internal Wi-Fi office is called a Wi-Fi router.

  • This page volition refer to all Wi-Fi routers and base stations as access points.

 Fifty-fifty if your computer is connected to an access point, images sent from the camera to the computer requires some changes in the computer`s settings. The procedures are explained below.

Windows 7 settings

  1. In the Start menu, select All Programs, and then select Canon Utilities.

  2. SelectCameraWindow, then selectWi-Fi connectedness setup.

  3. A screen similar to the i below will be displayed. SelectYes.

  4. The screen below appears.

  5. Select the Start menu on the computer, selectControl Console, then select Network and Cyberspace, and finally, select View network computers and devices.

  6. Don't close the displayed screen. Yous tin can at present connect the camera to the computer.

Windows viii settings

  1. Move the pointer to the bottom right of the screen to display the Charms dock(1), and and so select Starting time (2).

  2. SelectWi-Fi Connection Ready-up on the Get-go card.

  3. A screen similar to the one below will be displayed. Select Yes.

  4. SelectOK when the screen below appears.

  5. On the computer desktop screen, motion the mouse arrow to the lower-correct corner to open the Charms dock, select Settings, selectControl Panel, and finally, selectAdd a Device.

  6. Don't close the displayed screen. You lot can at present connect the photographic camera to the computer.

Connect the camera to the computer

 The PowerShot ELPH 190 is used to show the process below. The position and shape of the buttons, screens displayed, and settings may differ based the model y'all employ.

  1. Printing the Wi-Fi push button .

  2. With the default settings, the device nickname (1) is displayed.

  3. To change the photographic camera's nickname.

  • Press the up and downwardly directional buttons to choose the Nickname field.

  • Press thePart/Fix button button to display the keyboard, and and so enter the desired nickname.

  • Afterwards you entered the nickname, press the Menu button to return to the registration screen,

  • Press the up and down directional buttons , choose OK, and and so press the Part/Set push button .

  • The nickname you cull will exist displayed on Select a Device screen when you connect the camera to other devices via Wi-Fi.

  1. Press the upwards, downward, left, or right directional buttons  to chooseConnect to computer, then press the Part/Set up button.

  2. Press the up and downward directional buttons  to choose Add a Device, and and then printing the Function/Set up button .

     Once a computer is added, the computer name will be displayed on screen. To connect to the calculator again, simply choose the computer name from the list.

  3. A listing of detected access points will exist displayed in the Access Point Connect screen.

  4. WPS® connection, listed admission point, and manual connection are different methods to connect the camera to an access indicate.

WPS connexion

 WPS makes information technology easy to connect devices over Wi-Fi.

  • A WPS connexion button is affixed to your access bespeak. For further details on the location and how many seconds to press information technology, refer to the user transmission included with your access point.

  • Y'all tin utilize either push configuration (PBC) or Pin Method to ready upwards WPS on a supported device.

  • The PBC Method is used in the explanation below.

  1. Press the up and downwardly directional buttons  to choose WPS Connectedness, so press the Function/Prepare push .

  2. Press the upward and down directional buttons  to choose PBC Method, and so printing Role/Prepare button .

  3. Hold down the WPS connection button on the access point for a few seconds.

  4. Printing the Part/Set push  to select Adjacent on the camera.

  5. The camera will connect to the access betoken.

Listed admission point connection

 The admission bespeak'south encryption cardinal is necessary for connectedness.

  • Refer to the user guide included with your access indicate to await up information on SSID, Network certificates, and security keys.

  • An encryption central (network fundamental) is used when data needs to be encrypted while it is transmitted wirelessly.

  1. Press the upward and downward directional buttons  to cull an access point, so printing the Office/Fix push button .

  2. The Password Entry screen appears.

  3. Press the up and downwardly directional buttons  to choose the password entry field (1).

  4. Press the Office/Ready button  to brandish the keyboard.

  5. Enter the encryption key, and and so press the Function/Set push .

  6. After you enter the encryption key, press the up and downward directional buttons  to cull Next (2), and so printing the Role/Set up button .

  7. Press the up and downwards directional buttons  to choose Automobile and press the Office/Prepare button .

  8. A list of devices connected to the access point will appear on the screen.

  9. Printing the up and down directional buttons  to choose the name of the computer you want to connect with, and then press the Role/Set push button .

  10. The screen below appears.

  11. Your camera and computer are at present connected. If you use a Mac® or Windows with the drivers installed, the screen volition plough off afterward the connection is terminated.

Manual connection

 The access bespeak's encryption cardinal is necessary for connectedness.

  • Refer to the user guide included with your access point to look up information on SSID, Network certificates, and security keys.

  • An encryption cardinal (network fundamental) is used when data needs to be encrypted while it is transmitted wirelessly.

  1. Printing the upward and downward directional buttons  to cull Transmission Settings and press the Function/Prepare button .

  2. The SSID Entry screen appears.

  3. Press the up and downwardly directional buttons  to choose the SSID entry field (one).

  4. Press the Function/Set button  to display the keyboard.

  5. Enter the SSID, and so press the Function/Gear up button .

  6. Afterwards you enter the SSID, Printing the upward and downwards directional buttons  to choose Side by side (ii), and so press the Function/Prepare button .

  7. Press the up and down directional buttons  to cull the security setting method, and and so press the Part/Set button .

  8. The Password Entry screen appears.

  9. Press the up and downwardly directional buttons   to choose the password entry field (1).

  10. Press the Function/Ready push button to display the keyboard.

  11. Enter the encryption key, then press the Function/Set push .

  12. Afterwards you enter the encryption cardinal, press the upwards and down directional buttons  to cull Adjacent (2), and so press the Office/Set push button .

  13. Press the upward and downwards directional buttons  to choose Auto, and then press the Function/Set button .

  14. A list of devices connected to the access point will appear on the screen.

  15. Press the upwards and down directional buttons  to cull the name of the computer yous want to connect with, and then press the Role/Prepare button .

  16. The screen below appears.

  17. Your photographic camera and computer are now connected. If you apply a Mac ® or Windows with the drivers installed, the screen volition turn off after the connection is terminated.

Driver installation for Windows only

 Information technology is necessary to install the drivers when you wirelessly connect the camera to the estimator for the outset fourth dimension. Please follow the procedures below.

  • Make sure this screen appears on the camera`s display.

  • Windows 7

    • Double-click the connected device icon from Other devices and driver installation will begin.

    • After driver installation is consummate, and the camera and computer connexion is enabled, the AutoPlay screen will be displayed.

    • The camera's LCD console volition exist blank.

    • Select Download Images From Canon Photographic camera.

  • Yous tin can now send images from your camera to the computer.

  • Windows viii

    • The camera's icon will be displayed in the Add a device screen.

    • Double-click the icon to brainstorm driver installation.

    • When the connexion between the camera and the estimator has been established. A small window like to the one below volition appear. Select Tap to cull what happens with this device.

  • The camera's LCD panel will be bare.

  • SelectDownloads images from Canon photographic camera.

  • You tin can now send images from your camera to the computer.

Transport images to the figurer

 CameraWindow'southward default settings will salve images to the Pictures or My Pictures folders on a computer.

  • Movies volition have longer to import since the file size is larger than still images.

  • Turn off the camera to disconnect it.

  1. On the CameraWindow menu window, selectImport Images from Photographic camera.

  2. The next screen will appear. Select(1) Import Untransferred Images,(2) Select Images to Import, or(3) Import All Images.

  3. If yous chose Select Images to Import, (ane) select the images you want to import, and so (2) select theImport icon.

  4. The estimator will start to transfer images from the camera.

  5. Image import is at present complete. Select OK.

If your product issue was non resolved later following the steps in a higher place, or if y'all require additional assistance, please create or log in to your Canon Account to encounter your technical back up options.

Or if you still demand aid, visit our Canon Customs by clicking the button below to get answers:

Link to Canon Community Forum

jonesevines.blogspot.com

Source: https://support.usa.canon.com/kb/index?page=content&id=ART164100

0 Response to "How to Upload Pictures From a Canon Powershote Elph 360"

Postar um comentário

Assinar: Postar comentários (Atom)

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel